Substrate and preparation
The substrate must be dry, solid, clean, free of grease and dust, and absorbent. Pre-sand wooden surfaces with 150-180 grit in the direction of the grain.
Processing
Brushing, rolling, spraying. Room and surface temperature above 15 °C. Apply one full coat. Carefully remove the shiny residue after 20 minutes, otherwise there is a risk of sticking.
Drying time
Dust-dry after 24-48 hours. Can be recoated after 2-4 days. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase.
Note for untreated surfaces:
Apply a thick coat once. After approx. 20 minutes, carefully remove the shiny excess, otherwise there is a risk of sticking. Then leave to dry for 24-48 hours. Can be recoated after approx. 2-4 days. Before further treatment with another LEINOS product, it must be ensured that the primed substrate is well dried and no longer absorbent in order to avoid impoverishment of the subsequent films and thus inferior surfaces!
Consumption
Approx. 50-70 ml/m² per coat, may vary depending on the absorbency of the substrate.
