For simple, one-off, open-pored treatment of untreated or absorbent wooden surfaces indoors that are subject to minimal mechanical wear and tear. Thanks to the integrated primer, no prior treatment with another LEINOS product is necessary.
Not suitable for use in areas exposed to splashing water.
Substrate and preparation
Shake or stir thoroughly before use! The substrate must be dry, sound, clean, free from grease and dust, and absorbent. Pre-sand wooden surfaces with 100–180 grit sandpaper in the direction of the grain, depending on the type of wood and the desired depth of penetration.
Processing
Apply with a brush or by dipping. Polish again once dry. Room and surface temperature must be above 15 °C. Shake or stir thoroughly before use!
Drying time
Approx. 18–24 hours. To ensure the paint dries properly and to prevent odours from developing, we always recommend using a fan to ensure adequate air circulation over the painted surface during the drying phase.
Consumption
Approx. 90 ml/m²; this may vary depending on the absorbency of the substrate.
