The ideal gypsum wall filler for interior use. Easy to apply. Dries without cracking, even in thicker layers. Can be individually tinted with LEINOS Pigment Concentrates.
If you want to fill the joints in plasterboard or holes left behind by screws or similar, you should use our Interior Smoothing and Texturing Filler.
However, it is of course also possible to simply smooth a wall or create desired structures.
The ideal gypsum wall filler for interior use. Easy to apply. Dries without cracking, even in thicker layers. Can be individually tinted with LEINOS Pigment Concentrates.
If you want to fill the joints in plasterboard or holes left behind by screws or similar, you should use our Interior Smoothing and Texturing Filler.
However, it is of course also possible to simply smooth a wall or create desired structures.
Substrate and preparation
Can be used on stone, plaster, concrete, aerated concrete, insulating panels, etc. The substrate must be clean, solid, dry and sound. Dust, dirt, wallpaper, non-adherent or weakly bonded paints and loose, non-load-bearing plasters must be removed. Mixing ratio: Mix 1 kg Interior Smoothing and Texturing Filler with 600 ml room part water. Stir again briefly after 2-3 minutes.
Processing
To fill holes and cracks, press Interior Smoothing and Texturing Filler 684 firmly into the cavity and level off. For smooth surfaces, re-fill if necessary or wet and smooth evenly with a sponge board. Further work, e.g. sanding, wallpapering, painting, can be carried out after complete drying. When laying plasterboard or wall panels, apply Interior Smoothing and Texturing Filler 684 in dots to the back of the panel, press on and align the panel. Processing temperature: At least +5 °C for substrate and room air temperature.
