Low-yellowing primer, impregnation and finishing treatment for all absorbent interior substrates, especially for demanding furniture construction. LEINOS Hard Oil Clear is suitable for e.g. wood, cork and open-pored stone and also for areas subject to heavy wear (e.g. floors, doors, etc.).
The durability of the surface can be increased with a final treatment of Hard Oil Special 245 be significantly increased.
Low-yellowing primer, impregnation and finishing treatment for all absorbent interior substrates, especially for demanding furniture construction. LEINOS Hard Oil Clear is suitable for e.g. wood, cork and open-pored stone and also for areas subject to heavy wear (e.g. floors, doors, etc.).
The durability of the surface can be increased with a final treatment of Hard Oil Special 245 be significantly increased.
Substrate and preparation
The substrate must be dry, solid, absorbent, clean and free of resin and dust. Product is ready to use. Stir carefully before use!
Processing
Brushing, rolling, spraying, dipping. Room and surface temperature above 15 °C. The product should be applied in at least two coats. This can be done wet-on-wet: The second coat can be applied after a waiting time of 20 - 30 minutes. Important note: Irrespective of the application, the excess oil must be carefully removed approx. 30 minutes after the last application.
Sprayability:
Non-binding guide values: Airless: nozzle 0.20 mm, spray angle: approx. 30°-40°, filter approx. 100-180 meshes, high pressure: nozzle 0.20 mm, spray angle 30° filter 100-180 meshes, low pressure: nozzle 0.20 mm
Drying time
At 20 °C and 50 % relative humidity: Dust-dry after approx. 8 hours. Tread-resistant and suitable for further treatment after at least 16-20 hours. For reliable drying and to avoid odour formation, we always recommend using a fan to ensure sufficient air circulation on the surface of the paint during the drying phase.
Consumption
Approx. 50-70 ml/m², per coat.
