Resin-rich, wax-based finishing treatment for normal and heavily used surfaces. Particularly suitable for floors, stairs, doors and for demanding furniture construction. Excellent polishing properties. A primer with LEINOS Hard Oil 240 is required.
Resin-rich, wax-based finishing treatment for normal and heavily used surfaces. Particularly suitable for floors, stairs, doors and for demanding furniture construction. Excellent polishing properties. A primer with LEINOS Hard Oil 240 is required.
Substrate and preparation
Untreated wood must be pretreated with Hard Oil 240 or similar product. The substrate must be dry, solid, clean, free of grease and dust and absorbent. Pre-sand wooden surfaces with 150-180 grit in the direction of the grain.
Processing
Stir carefully before use! Brushing, rolling, spraying, dipping. Apply sparingly to avoid drying problems! Room and surface temperature above 15 °C. Polishes up well. Important note: Regardless of the application, carefully remove the excess oil approx. 30 minutes after the last application.
Sprayability:
Non-binding guide values: Airless: nozzle 0.20 mm, spray angle: approx. 30°-40°, filter approx. 100-180 meshes, high pressure: nozzle 0.20 mm, spray angle 30° filter 100-180 meshes, low pressure: nozzle 0.20 mm
Drying time
Dust-dry after approx. 10-12 hours at 20 °C and 50 % relative humidity. Can be walked on and recoated after approx. 16-24 hours. For reliable drying and to avoid odours, we always recommend the use of a fan to ensure sufficient air circulation on the surface during the drying phase.
Consumption
Approx. 10-30 ml/m², may vary depending on the absorbency of the substrate.
