Wood used outdoors requires a coating that can withstand the elements. For this purpose, our Wood Varnish provides a coating that allows the natural grain of the wood to show through.
Weather-resistant and with a protective film to prevent fungal growth, you can use this wood stain on windows or doors, for example.
With this LEINOS product, too, you’re spoilt for choice with 10 different shades. If these colours aren’t quite what you’re looking for, this product can also be machine-tinted to your desired colour using the ‘Oils and Glazes’ colour chart.
Are you actually looking for a Wood Varnish for indoor use? No problem! We also have one Wood Varnish for interior use in our range.
Wood used outdoors requires a coating that can withstand the elements. For this purpose, our Wood Varnish provides a coating that allows the natural grain of the wood to show through.
Weather-resistant and with a protective film to prevent fungal growth, you can use this wood stain on windows or doors, for example.
With this LEINOS product, too, you’re spoilt for choice with 10 different shades. If these colours aren’t quite what you’re looking for, this product can also be machine-tinted to your desired colour using the ‘Oils and Glazes’ colour chart.
Are you actually looking for a Wood Varnish for indoor use? No problem! We also have one Wood Varnish for interior use in our range.
Substrate and preparation
To achieve the best possible results, please refer to the technical data sheets for all products used. The substrate must be dry, sound, clean, free from grease and dust, and absorbent.
Processing
Brush, roll or spray. Ambient and surface temperature above 15 °C.
A. Coating system for untreated or absorbent substrates:
Pre-sand wooden surfaces with 120-grit sandpaper in the direction of the grain. Prime with Impregnation Primer 150. Then apply three thin coats of Wood Varnish 260. To achieve the best results, please refer to the technical data sheets for all products used.
B. Refurbishment paintwork:
Remove all traces of old, pore-clogging paint. If the surface is absorbent, it must be primed. Then apply three thin coats of Wood Varnish 260.
Please note: Protect old, cracked beams from driving rain during the painting work and for 3–4 days afterwards. Any cracks that appear subsequently in fresh wood must be treated immediately.
Sprayability:
Approximate guidelines: Airless: nozzle 0.20 mm, spray angle: approx. 30°–40°, filter approx. 100–180 mesh; high pressure: nozzle 0.20 mm, spray angle 30°, filter 100–180 mesh, low-pressure: nozzle 0.20 mm
Drying time
Approx. 16–24 hours in normal conditions.
Consumption
Approx. 60–80 ml/m² per coat. Apply sparingly to prevent drying problems!
Available ready-mix colours
In addition to our ready-mix colour shades, the Wood Varnish can be tinted in many other colours (see illustration on the right). You can view an enlarged version, including all colour names, Download here.
Weather and water-resistant Wood Varnish for decorative exterior wood coatings.
Weather and water-resistant protective and decorative coating for exterior wooden facades and walls.
Water-based Wood Varnish for the protection and decoration of interior and exterior wooden surfaces.
