Clay Plaster Fine

Wandgestaltung

A coat of Clay Plaster Fine creates highly diffusible and mould-preventive surfaces and is suitable for all absorbent, mineral substrates, coatings in drywall construction, on fixed wallpaper and especially for clay substrates indoors.

Add to watchlist

Application is this simple

Substrate and preparation
The substrate must be dry, solid, absorbent, clean and dust-free. If in doubt, carry out a test coat and, if necessary, treat with LEINOS Deep Sealer 620 prime.

Processing
Always stir well before use and during application. Apply the paint evenly with a roller, brush or flat brush and spread in all directions. As a rule, 1 coat is sufficient. Ventilate well during application and drying time.

Drying time
At 20 °C and 50 % relative humidity: Approx. 6-12 hours.

Consumption
1 litre is sufficient for approx. 4-4.5 m².

For an optimal result you would need:

Deep Sealer

Primer for highly or differently absorbent wall surfaces.

Interior Smoothing and Texturing Filler

For smoothing interior wall and ceiling surfaces and for filling joints in plasterboard and other building boards.

Optional/Alternative:

Pigment Concentrate

For colouring or tinting suitable products from LEINOS Naturfarben.