Highly breathable, fine-grained and moisture-regulating brush-on plaster as a decorative and protective coating for all absorbent, mineral substrates indoors, such as lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, clay plaster, etc. Mould preventive and suitable for damp rooms.
Highly breathable, fine-grained and moisture-regulating brush-on plaster as a decorative and protective coating for all absorbent, mineral substrates indoors, such as lime plaster, cement plaster, sand-lime brick, cement, aerated concrete, brick, clay plaster, etc. Mould preventive and suitable for damp rooms.
Substrate and preparation
All substrates must be pre-treated in accordance with the specifications of VOB/C DIN 18363. Remove sintered skin from plaster surfaces mechanically. Treat chalky and very absorbent surfaces with Silicate Primer 621 or Mineral Plaster Primer 622 pre-treat. New base coats must be at least 2-3 weeks old. Substrates with water-soluble, discolouring ingredients must be checked for suitability beforehand. If in doubt, carry out a test coat.
Processing
Always stir well before use and during application. Apply the paint evenly with a brush or roller and spread in all directions. Stir Lime Brush Rendering 667 well. As a rule, 2 coats are applied undiluted.
Drying time
At 20 °C and 50 % relative humidity: Approx. 12 hours. Subsequent coats after 24 hours drying time.
Consumption
1 litre is sufficient for approx. 3-5 m² per coat.
Alkaline universal fixative for priming silicate and Lime Paint, solvent-free.
Primer for all subsequent wall coating systems on mineral substrates indoors.
Fine, very white lime filler for interior use.
For the safe removal of mould indoors.
