If you would like to fill the joints or holes left behind by screws or similar on calcareous surfaces and then use our Silicate Clay Paint or Lime Paint lime universal scraper is ideal for such work. This has a high pH value and therefore also contributes to mould prevention.
If you would like to fill the joints or holes left behind by screws or similar on calcareous surfaces and then use our Silicate Clay Paint or Lime Paint lime universal scraper is ideal for such work. This has a high pH value and therefore also contributes to mould prevention.
Substrate and preparation
All substrates must be pre-treated in accordance with the specifications of VOB/C DIN 18363. Mineral substrates as well as gypsum fibreboards and firmly adhering old coatings are suitable for processing. Before levelling, we generally recommend an adhesion-promoting and absorbency-regulating primer coat of LEINOS Silicate Primer 621 or Mineral Plaster Primer 622.
Processing
mix 20 kg of LEINOS Lime universal scraper thoroughly and lump-free with approx. 6 litres of clean water. Apply within 5 hours with a plastering board or smoothing trowel in layer thicknesses of 1 - 3 mm. The surface is felted or smoothed. Do not apply at temperatures below 5 °C and allow to dry. LEINOS Lime Filler can be recoated with LEINOS Lime Paint and Silicate Paint products. IMPORTANT: Ensure alkali-resistant substrates and products! Carefully cover and protect eyes, skin and alkali-sensitive substrates.
Drying time
Depending on layer thickness, but at least 24 hours. Very slow drying from 3 mm layer thickness. Carbonation time: at least 2-3 days.
Consumption
Consumption per mm application thickness/m² approx. 1 kg.
