Silicate Paint

Substrate and preparation
Stir carefully before use. The substrate must be dry, sound and clean. Paint, oil, latex and synthetic resin coatings must be removed. Substrates such as aerated concrete and other highly absorbent or sanding substrates are treated with LEINOS Silicate Primer 621 pretreated. Painter's fleece must also first be LEINOS Silicate Primer 621 be pre-coated. In the case of substrates from which wallpaper has been removed, the substrate surface must be lightly sanded (100 grit) and well dusted (first sweep or vacuum, then wipe with a damp cloth) or thoroughly cleaned with a brush and hot water. After 24 hours drying with LEINOS Silicate Primer 621 prime. Wallpaper paste residues can lead to adhesion problems and discolouration of the paint.

Important note:
When coating the various substrates with aqueous, open-pored paint systems, certain substances such as lignin, nicotine, rust, various salts or moisture from the substrate can penetrate and possibly lead to discolouration. It is therefore essential to check the substrate for suitability and carry out preliminary tests (sample surfaces). Substrates that have not yet been painted, as well as gypsum plaster and plasterboard surfaces, should first be treated with LEINOS Silicate Primer 621 pre-treated. To equalise different absorbencies, e.g. filling and repair areas, pre-treatment with LEINOS Silicate Primer 621 also makes sense. If in doubt, apply a test coat.

Processing
After stirring, apply with a roller or brush. When using a roller (soft paint roller), apply the product crosswise. After 24 hours, the plaster can be painted over or glazed.

Drying time
At 20 °C and 50 % relative humidity: In a normal climate, dust-dry after approx. 3 hours and recoatable after approx. 12 hours. Ensure good ventilation! Do not apply at temperatures below 5 °C.

Consumption
1 litre is sufficient for 5-6 m² per coat, depending on the absorbency of the substrate.