Wood outdoors is exposed to a wide variety of weather conditions throughout the year and should be protected against blazing sun, heavy rain and cold. Our LEINOS Weatherproof Paint with its protective coating film is ideal for coating and colouring.
The paint is environmentally friendly, has a semi-gloss finish, does not flake off and therefore looks good on all exterior wooden structures. The protective paint film is ideal for coating and colouring rough sawn wood.
You have a total of eight different oil-based colours to choose from: vine black, earth brown, fir green, Frisian blue, Swedish red, corn yellow, steel grey and old white. We also offer the two colours Swedish red and corn yellow in our Weatherproof Paint Water-Based to.
Wood outdoors is exposed to a wide variety of weather conditions throughout the year and should be protected against blazing sun, heavy rain and cold. Our LEINOS Weatherproof Paint with its protective coating film is ideal for coating and colouring.
The paint is environmentally friendly, has a semi-gloss finish, does not flake off and therefore looks good on all exterior wooden structures. The protective paint film is ideal for coating and colouring rough sawn wood.
You have a total of eight different oil-based colours to choose from: vine black, earth brown, fir green, Frisian blue, Swedish red, corn yellow, steel grey and old white. We also offer the two colours Swedish red and corn yellow in our Weatherproof Paint Water-Based to.
Substrate and preparation
The substrate must be dry, solid, clean and free of grease and dust. Brush out untreated, rough-sawn wood beforehand and treat with LEINOS Impregnation Primer 150 prime. Scrape out resin spots and coat with LEINOS Thinner 200 clean. Resin build-up cannot be prevented with technical coating measures.
Processing
Apply sparingly by brushing, rolling or spraying at an ambient and surface temperature above 15 °C. Two coats required. Product is ready to use. Stir carefully before use!
Sprayability:
Non-binding guide values: Airless: nozzles 0.23-0.33 mm, spray angle: approx. 30°, filter approx. 180 meshes.
Drying time
At 20 °C and 50 % relative humidity: Dust-dry after approx. 12 hours. Dry and recoatable after approx. 24 hours. This system requires sufficient quantities of atmospheric oxygen for drying.
Consumption
Approx. 55-85 ml/m² per coat on planed or sanded wood. The consumption is slightly higher for rough sawn wood. Apply sparingly to avoid drying problems!
Available colours
All colour shades can be mixed with each other.
