Wood used outdoors must not only be reliably protected, but also have character. With LEINOS Weatherproof Paint Mix, you have access to all the colour shades of the LEINOS Trend Colours are available. This allows you to showcase garden sheds, façades, fences and other wooden structures in a personalised way that suits your own design vision.
The Weatherproof Paint Mix offers the tried-and-tested properties of our Weatherproof Paint Oil-Based: good coverage, an elastic paint film and a weather- and UV-resistant finish. It is also ideally suited for rough-sawn timber. Anyone who prefers one of our well-known Ready-Mix shades will still find them at the LEINOS Weatherproof Paint 850.
Wood used outdoors must not only be reliably protected, but also have character. With LEINOS Weatherproof Paint Mix, you have access to all the colour shades of the LEINOS Trend Colours are available. This allows you to showcase garden sheds, façades, fences and other wooden structures in a personalised way that suits your own design vision.
The Weatherproof Paint Mix offers the tried-and-tested properties of our Weatherproof Paint Oil-Based: good coverage, an elastic paint film and a weather- and UV-resistant finish. It is also ideally suited for rough-sawn timber. Anyone who prefers one of our well-known Ready-Mix shades will still find them at the LEINOS Weatherproof Paint 850.
Substrate and preparation
The surface must be dry, solid, clean and free from grease and dust. Untreated, rough-sawn timber should be brushed down beforehand and treated with LEINOS Impregnation Primer 150 Prime. Scrape out any resin pockets and LEINOS Thinner 200 Clean. Resin seepage cannot be prevented by coating techniques.
Processing
Apply sparingly by brushing, rolling or spraying at an ambient and surface temperature above 15 °C. Two coats are required. The product is ready for use. Stir thoroughly before use!
Sprayability:
Approximate guidelines (not binding): Airless: nozzles 0.23–0.33 mm, spray angle: approx. 30°, filter: approx. 180 mesh.
Drying time
At 20 °C and 50 % relative humidity: Dust-dry after approx. 12 hours. Dry and ready for recoating after approx. 24 hours. This system requires sufficient amounts of atmospheric oxygen to dry.
Consumption
Approx. 55–85 ml/m² per coat on planed or sanded timber. Coverage is slightly higher on rough-sawn timber. Apply sparingly to avoid drying problems!
Shade
Available in all shades of the LEINOS Trend Colours.
