LEINOS Wooden Floor Soap is a highly concentrated product for the cleaning, care and finishing of soaped and leached, as well as natural and white oiled wooden surfaces. For the initial treatment of softwood floors subject to normal wear, e.g. in living and sleeping areas, for wall and ceiling panelling, as well as for furniture and doors.
Also suitable as an intensive cleaning agent for heavily soiled outdoor surfaces, e.g. wooden decking, fences, doors, stone tiles, brickwork, etc. Ideal for cleaning and removing fungal and algae infestation. With regular use, an elegant patina forms.
LEINOS Wooden Floor Soap is a highly concentrated product for the cleaning, care and finishing of soaped and leached, as well as natural and white oiled wooden surfaces. For the initial treatment of softwood floors subject to normal wear, e.g. in living and sleeping areas, for wall and ceiling panelling, as well as for furniture and doors.
Also suitable as an intensive cleaning agent for heavily soiled outdoor surfaces, e.g. wooden decking, fences, doors, stone tiles, brickwork, etc. Ideal for cleaning and removing fungal and algae infestation. With regular use, an elegant patina forms.
Processing
For intensive cleaning: Dilute Wooden Floor Soap 1:20 to 1:40 with warm water, depending on the degree of soiling. E.G: mix 250 ml Wooden Floor Soap with 5-10 litres of water. Apply the cleaner evenly with a wide brush or paintbrush. The treated surface should be sufficiently wet. Leave to work for approx. 20 minutes. Then scrub/wash the surface thoroughly with a brush. Repeat the treatment if necessary. Rinse the surface with water and leave to dry. The surface can then be treated with Terrace Wood Oil 236 treated. Tip: In the case of heavy fungal and algae infestation, leave the Wooden Floor Soap to work for 3-4 days, then rinse with water. Remove any remaining stains with a hard brush. Clean tools with water immediately after use. Do not use at temperatures below +8 °C.
Initial treatment of softwood floors:
Add soap to mop water (1:10), rinse a cotton cloth or mop in it, wring out slightly and damp mop the floor. Leave to work briefly and rinse the mop with clean water.
Maintenance cleaning:
Add soap to the mop water (1:40) and damp mop the floor as described above. Leave to work for a short time and rinse the mop with clean water, removing any stubborn dirt with a white pad and a little soapy water. Then wipe with a clean soap solution and leave to dry. Do not rinse with clean water!
Consumption
Intensive Cleaner: 1 litre of diluted concentrate (1:20 - 1:40) is sufficient for approx. 120-150 m². Initial treatment: 1 litre of diluted concentrate at a mixing ratio of 1:10 is sufficient for approx. 10-25 m². Underhelmet cleaning: At a mixing ratio of 1:40, 1 litre of concentrate is sufficient for 400-600 m².
