Suitable for mineral and synthetic resin-bonded façade surfaces, silicifiable sol-silicate façade paint.
The selected binder formulation ensures excellent adhesion even on non-mineral substrates, matt silicone resin and emulsion paint coatings as well as ETICS (external thermal insulation composite systems). After drying, the coatings are cloth-matt, water vapour diffusible (sd value (H2O):0.01m) and have a mineral character.
Suitable for mineral and synthetic resin-bonded façade surfaces, silicifiable sol-silicate façade paint.
The selected binder formulation ensures excellent adhesion even on non-mineral substrates, matt silicone resin and emulsion paint coatings as well as ETICS (external thermal insulation composite systems). After drying, the coatings are cloth-matt, water vapour diffusible (sd value (H2O):0.01m) and have a mineral character.
Substrate and preparation
Stir and sieve thoroughly before use to remove dried paint particles from the edge of the bucket or lid. All surfaces must be professionally prepared in accordance with VOB Part C DIN 18363 or the BFS data sheets. Holes and chippings must be repaired with a suitable material with the same structure and must be completely dry before further processing. Hairline cracks and structural differences can be filled over the entire surface with LEINOS Professional Quartz Filler must be prepared. Unsafe substrates must be assessed individually and sample areas created for the coating structure.
Unsuitable substrates:
Wood and wood-based materials, clay, plaster, plastics, substrates on which water cannot run off and dry well, surfaces exposed to salt, generally non-load-bearing substrates, as well as glossy and plasto-elastic substrates.
Processing
By adding LEINOS Professional Fixative the coating is adjusted according to the processing and substrate requirements. The primer coat with approx. 5-15 % LEINOS Professional Fixative the final coat after 12 hours with approx. 5 % of LEINOS Professional Fixative. LEINOS ProfiSol-Fassadenfarbe fein is applied in at least 2 coats. A further coat is recommended on façade surfaces with increased weather exposure. The paint is applied with a brush, roller or airless device. For contiguous surfaces, it is essential to apply a thin coat without overlaps, evenly and crosswise.
Drying time
Process for at least 12 hours per coat, not below +8 °C. Do not apply LEINOS ProfiSol Facade Paint in direct sunlight or on heated substrates. Protect fresh coats from rain.
Consumption
Average coverage approx. 0.13 l/m² on smooth, normally absorbent substrates, with a single coat.
